RV60
Paper CraftDownload
Please pay special attention when you handle a cutter knife and a sharp instrument.
Regarding all our papercraft contained herein, they are prohibited to reproduce and use for other purposes of profit-making without our permission.
Making proceduresRV60
-
1
- Download the file and print out on an optional paper.
-
2
- Carefully cut off an outward form by a cutter knife, etc.
-
3
- Lightly trace the bend portion with something, the edge of which is sharpened and then crease. Be careful, the paper will be torn if you would trace strongly.
-
4
- If you color which is similar to each part to the end of the cut out portion by a colored pencil, etc., the stuck portion will not be noticeable.
-
5
- For the part（1） which connects an engine and a fuel tank, make a cut in the part of the engine and glue it firstly. After that, assemble the engine part.
-
-
6
- Assemble the each part and glue every part which has the same symbol.
-
7
- For the part（2）, do not make a mistake for the front and the back.(Lower height portion is the front.)
-
8
- Carefully assembly a striking plate so as not to warp.
-
9
- Complete referring to the completion picture.
-
